English - 5
Control and Connection Panels
Figure 2. T4S Connection Panel
Connection Panel
q
POWER SWITCH
– Turns the mixer on or off.
w
USB 2.0 TYPE-B
– A USB interface that allows you to connect the mixer to your computer.
e
USB 2.0 TYPE-A
– A USB interface that allows you to stream audio from your flash drive.
r
ANALOG L/R OUTPUT
– Main analog output. Accepts 1/4" TRS balanced or TS unbalanced cables.
t
AUX OUTPUT
– Two user-definable analog outputs. Can be configured for a pre-fader, post-EQ, and effects,
or post-fader output. Accepts 1/4" TRS balanced cables.
y
AUX IN
– Analog input channels 5/6. Accepts 1/4" TRS balanced or TS unbalanced cables for line-level
inputs. Can be used for stereo input signals.
u
INPUTS 1-4
– Analog input channels 1-4. Accepts XLR balanced cables for microphones or 1/4" TRS balanced
or TS unbalanced cables for high-impedance inputs, such as guitars.
i
DIGITAL MAIN OUTPUT L
– Connect digitally in stereo to two L1® Model 1S/II systems.
Note:
Only used in
stereo with Digital Main Output R.
o
POWER PORT/DIGITAL MAIN OUTPUT R
– A digital output used by the L1 Model 1S/II system. Delivers
power to the T4S mixer from the L1 Model 1S/II power stand. Can also deliver power from an AC outlet via
a ToneMatch power supply (not included with the T4S). Accepts the included ToneMatch® cable.
CAUTION:
Although the ToneMatch port accepts a standard RJ-45 connector, do NOT connect the T4S
to a computer or phone network.
USB AUDIO
M
(
)
MONO
q
w
e
r
t
y
u
i
o
