manualshive.com logo in svg

Bose T1 ToneMatch, Service Manual

Share
Download
Bose T1 ToneMatch Service Manual Download Page 66

66

Troubleshooting

Problem 

What to check 

T1 is plugged 
in, power switch 
is on, but no 
power. 

Make sure you have power at the AC outlet. Try operating a lamp or other 
equipment from the same AC outlet or test the outlet using an AC outlet tester. 
 
If using the T1 with an L1

TM

 model II system: 

• Make sure the ToneMatch cable is properly connected to the audio engine  
  and the L1 power stand. 
• Make sure the L1 power stand is turned on and the power LED is blue. 
 
If using the T1 with an L1 model 1 system: 
• Make sure the audio engine is properly connected to the T1 audio engine  
  power supply. 
• If available, try a different audio engine power supply. 

T1 is on, but 
there is no 
sound. 

• Make sure the Master volume control is turned up. 
• Verify that the input channel(s) you want to hear are not muted. 
• Check that the volume control is turned up for the channel you want to hear. 
• Make sure the appropriate input channel trim control has been tuned up  
  enough so that the green LED is on (indicating that there is a strong input  
  signal). 
• Check the Prefs (Preference) Input and Output level meters to confirm that  
  there is a signal at both the input and output stages. 
• Make sure volume control is turned up on your input source (instrument). 
• Connect your input source (instrument) to the audio engine using a  
  different cable. 
• Plug your input source (instrument) directly into the L1

TM

 power stand or a  

  different amplifier to make sure the source is working. 
• Turn the audio engine off and wait 30 seconds. Then turn the unit on  
  again. 
 
If using the T1 with an L1 model II system: 
• Turn off the power stand, re-seat the ToneMatch

TM

 cable plug in the  

  ToneMatch port and turn on the power stand again. 
• If available, try a different ToneMatch cable. If another ToneMatch cable is  
  not available, try a standard Ethernet cable. 
• Connect the T1 Master output to the Analog Input on the power stand using a  
  ¼” phone plug cable. Turn up the power stand trim control and verify that you  
  hear sound. 
• Make sure the power LED on the power stand is blue. If it is red, the problem  
  is in the power stand. 
 
If using the T1 with an L1 model I system: 
• Make sure the T1 Master output is connected to the Channel 3 or 4 Line IN  
  on the power stand. Turn up the power stand Channel 3 / 4 line input level  
  and verify that the system is producing sound. 
• If using the R1 remote control with the system, make sure the R1 Master  
  volume is turned up. 
• Make sure the power LED on the power stand is green. If the LED is red or  
  yellow, the problem is in the power stand. 

 

Summary of Contents for T1 ToneMatch







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands