manualshive.com logo in svg

Bose T1 ToneMatch, Service Manual

Share
Download
Bose T1 ToneMatch Service Manual Download Page 41

41

Disassembly Procedures

3. Input / Output Panel Removal

3.1 Perform procedure 2.

3.2 Using a Phillips-head screwdriver,
remove the six screws that secure the RJ45
and Neutrik

®

 jacks to the I/O panel.

3.3 Remove the seven plastic nuts that
secure the 1/4” phono jacks to the I/O panel.
Slide off the I/O panel.

3.4 On the Main PCB, unplug the wiring
harness for the ON/OFF switch at connector
CN2.

4. Input / Output PCB Assembly Removal

4.1 Perform procedure 3.

4.2 Using a Phillps-head screwdriver, re-
move the two screws that secure the I/O
PCB to the two metal standoffs on the Main
PCB.

4.3 Lift the I/O PCB straight off of the Main
PCB to disengage it from connector CN504.

4.4 Unsolder the black ground wire located
near C72 on the Main PCB.

5. LCD PCB Assembly Removal

5.1 Perform procedure 2.

5.2 Using a pair of needle-nose pliers,
compress the legs of the nylon standoffs that
secure the LCD PCB assembly the Main
PCB assembly.

5.3 Carefully lift off the LCD PCB assembly
and unplug the ribbon cable from the Main
PCB at CN500. Unplug the DC power wire
harness at CN501A.

Summary of Contents for T1 ToneMatch







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands