5
Y
OUR
SL2
WIRELESS
SURROUND
LINK
English
Deutsch
Français
Dansk
Español
Italiano
Svenska
Nederlands
Positioning the SL2 transmitter and receiver
Radio frequency transmissions make this product easy to place. With no need to point the
SL2 transmitter at its receiver, you can hide the two from view if you like.
The SL2 transmitter, which is labeled on the back, is also distinguished by the single RCA
jack (Figure 2). The SL2 receiver, also labeled on the back, has two RCA jacks.
1.
Place the SL2 transmitter within 6 feet (2 meters) of the Acoustimass
®
module.
Make sure it is within reach of an AC (mains) outlet.
2.
Place the SL2 receiver at the same end of the room as your surround speakers.
It, too, should be within reach of an AC (mains) outlet.
You can position the transmitter/receiver pair:
• From 2 feet (.6 meters) to 30 feet (9.2 meters) apart
• Upright on the floor, under a sofa or chair, or behind furnishings
• Where the sides are unobstructed to allow for ventilation
Making the connections
Use the small power pack with the SL2 transmitter (Figure 2). The large power pack connects
to the SL2 receiver.
Figure 2
Different power
supplies
Connect the supplied power cord to the receiver power pack before you plug it into the wall.
Your transmitter power pack may also include a separate power cord. If so, connect that cord
to the transmitter power pack before plugging it into the wall.
Transmitter
power pack
Receiver
power pack
SL2 transmitter
SL2 receiver
