20
•
English
CSP-428/1248
•
Installation Guide
PRO.BOSE.COM
Technical Information
Technical Information
Technical Specifications
CSP-428
Integrated DSP
Signal Process/CPU
32-bit fixed/floating-point DSP + Arm® processor, 456 MHz
Maximum Calculation
3.6 GIPS / 2.7 GFLOPS
Audio Latency
900 μs (analog in to analog out)
A/D and D/A Converters
24-bit
Sample Rate
48 kHz
Audio Performance
Frequency Response
20 Hz to 20 kHz (±0.5 dB)
THD+N
< 0.01% at +4 dBu (A-weighted/20 Hz to 20 kHz)
Channel Separation (Crosstalk) < –105 dB at +4 dBu input and output level, 1 kHz
Dynamic Range
115 dB A-weighted 20 Hz to 20 kHz, analog through, 600 Ώ load
Audio Inputs
Inputs (balanced)
2 analog (balanced, Mic/Line Level/Page-In)
Inputs (unbalanced)
2 analog (unbalanced, RCA Line-In, summed to mono)
Connectors, Input
Balance Input: green 3.81 mm pitch (3-pin/6-pin)
Page-In: green 3.81 mm pitch (4-pin)
Unbalanced Input: red/white RCA connector
Input Impedance
12 kΩ at 1 kHz (with or without phantom power active)
Maximum Input Level
+24 dBu (THD+N
≤
0.3%, 20 Hz to 20 kHz, 0 dB gain)
Equivalent Input Noise
< –117 dBu (22 Hz to 20 kHz, 150 Ω input, 64 dB gain)
Phantom Power
+48V, open circuit, 10 mA max per channel, selectable per input, 80 mA
max across all channels
Pre-Gain Settings
0/14/24/32/44/54/64 dB
Audio Outputs
Outputs
2 analog (balanced, Line Level), 8 digital (AmpLink output)
Connectors, Output
Analog Output: orange 3.81 mm pitch (6-pin)
Digital Output: RJ-45 without LED (AmpLink output)
Output Impedance
66 Ω
Maximum Output Level
+24 dBu (THD+N
≤
0.3%, 22 Hz to 20 kHz )
Control Inputs
Inputs (Control)
8 analog inputs, 2 kΩ internal pull-up resistor to 5 V, green 3.81 mm pitch
connector (9-pin)
Mute (Control)
1 analog input, 2 kΩ internal pull-up resistor to 5 V, black 3.81 mm pitch
connector (2-pin)
Analog Input Voltage
0 V to 3.3 V (maximum 5 V)
Digital Input Voltage
0 V to 3.3 V (threshold voltage = 1.6 V)
Control Outputs
Outputs (Control)
1 digital output, orange 3.81 mm pitch connector (2-pin)
Output Voltage
High: 8 V (open circuit), 2.5 V at 10 mA, Low: < 1 V at 100 mA, push-pull
Output Current
10 mA source, 100 mA sink (24 VDC max external supply voltage)
