Bose Professional DesignMax DM6SE, Installation Manual

Page: 7 / 88

English • 7 Installation Guide • DesignMax DM6SE
PRO.BOSE.COM
Installation
Important Mounting Information
q
Bracket lock tabs: Used to secure the loudspeaker angle.
w
Grille release tabs: Used to secure the grille to the loudspeaker.
e
Lock blockers: Used to secure the loudspeaker to the mounting bracket.
r
Angle labels (on bracket):
Identify your desired angle position.
r
q q
w
w
w
w
e e
Installing the Loudspeaker
WARNING: Failure to follow the steps below could lead to
an unsafe mounting condition, which could create a falling
hazard.
1. Remove the lock blockers from the lock tabs. Make sure not to
pull the lock blocker tethers out of the loudspeaker.
2. Attach the loudspeaker to the bracket, unlock lock tabs to
adjust the loudspeaker to 45°, and lock the tabs into place.
3. Attach the wired connector to the loudspeaker.
4. For outdoor installations, place the weather-resistant input
cover over the connector and press it firmly against the
loudspeaker to create a tight seal. See Preparing the Weather-
resistant Input Cover
on page 4.
5. Unlock the tabs and adjust the loudspeaker to your desired
angle. Make sure to support the weight of the loudspeaker
while you adjust the loudspeaker angle.
Note:
The angle of the loudspeaker can be adjusted to 0°, 15°,
30°, or 45°.
6. Lock the tabs into place.
7. Press the lock blockers onto the lock tabs until the blockers
snap securely around the tabs, maintaining the desired
loudspeaker angle.