Bosch YOU Series, Original Instructions Manual

Page: 31 / 420

English | 31
Be sure to apply consistent contact pressure in order to increase the lifetime of the sand-
ing sheets.
Excessively increasing the contact pressure will not lead to increased sanding perform-
ance, rather it will cause more severe wear of the power tool and of the sanding sheet.
Do not use a sanding sheet for other materials after it has been used to work on metal.
Use only original
Bosch -sanding accessories.
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be overloaded. If the power tool is
overloaded or the permitted battery temperature is exceeded, the electronics of the
power tool will switch off until the temperature returns to within the optimum operating
temperature range.
Maintenance and Service
Maintenance and cleaning
u
Remove the battery from the power tool before carrying out work on the power
tool (e.g. maintenance, changing tool, etc.). The battery should also be removed
for transport and storage.
There is risk of injury from unintentionally pressing the
on/off switch.
u
To ensure safe and efficient operation, always keep the power tool and the vent-
ilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. You can find explosion drawings and information on
spare parts at:
www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
Bosch Power Tools 1 609 92A 54D | (29.05.2019)