Bosch XDK 110 General Information Manual Download

Page: 8 / 53

XDK110

BCDS

copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.

Note: Specifications within this document are subject to change without notice.

General Information Guide XDK110

Page

1.3 Getting Started

1.3.1 Software Download and installation

The software for the XDK is available online. You can download the software from

http://

www.xdk.bosch-connectivity.com

Go to the download section to get the latest software package

and demos.

Download the software package “XDK Workbench” from the website

http://www.xdk.bosch-

connectivity.com

and start the installer. The software package contains all necessary components.

Program examples, demos and a toolbox are included.

1.3.2 Connecting XDK110

Connect the USB cable (included in delivery) to the USB connector of your PC and the Mini USB

connector of the XDK.

Note

: Functional Limitations:

The device can be impaired or damaged if the power source is inadequate.

• Do not use cables >3 m.

• Use only certified USB power adapters/connectors.

General Information Guide XDK110

Page

Summary of Contents for XDK 110






















































Search results

Summary of Contents for XDK 110

Reviews:

Related manuals for XDK 110

Brands by name

Popular brands

Bosch XDK 110, General Information Manual

Search results

Summary of Contents for XDK 110

Reviews:

Related manuals for XDK 110

Brands by name

Popular brands