Bosch XDK 110 General Information Manual Download Page 6

Page: 6 / 53

XDK110

BCDS

copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.

Note: Specifications within this document are subject to change without notice.

General Information Guide XDK110

Page

1.2.3 Technical Specifications

Table 1

: XDK110 Specifications

Please note that full sensor performance might be limited to a more narrow temperature range, and

sensor performance might be decreased when operating outside this corner cases. Refer to the

sensor datasheets for details.

1.2.4 XDK Device

Picture 1

: Bosch XDK Device

Name

Value

Temperature Range

-20 °C – 60 °C (operating)
0 °C – 45 °C (charging)

Humidity

10 – 90 % r.H., non-condensing

IP Rating

IP 30 (IEC 60529)

Flammability classification

HB (IEC 60695-11-10/-20; CSA C 22.2)

Voltage

5 V DC

Charging Current

500 mA Maximum

Communication (cable)

USB

Wireless LAN

IEEE 802.11 b/g/n

Bluetooth 4.0 low energy

IEEE 802.15.1

General Information Guide XDK110

Page

Summary of Contents for XDK 110






















































Search results

Summary of Contents for XDK 110

Reviews:

Brands by name

Popular brands

Bosch XDK 110, General Information Manual

Search results

Summary of Contents for XDK 110

Reviews:

Brands by name

Popular brands