MAN-WZ20-03
Camera Positioning
•
Use provided alan key from box to
make adjustments
•
Locate and loosen all 3 setscrews on
bracket
•
Setscrews are shown at (a), (b) and
(c) - picture on the left
•
Pan (a), Tilt (b) and Rotate (c)
•
Do not pan or twist beyond 360
˚
as
shown
•
Do not tilt beyond 90 ° as shown
•
Do not apply excessive force when
adjusting camera positioning
Installation (cont’d)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that my cause undesired operation
NOTE: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If the camera turns on and off, try to correct the
interference using one or more of the following:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•
Consult Bosch Security Systems, Inc.
for technical support.
Camera Specifications
Part Number
WZ20NXV550-0 (NTSC) | WZ20PXV550-0 (PAL)
Signal Processing
Digital signal processing (DSP)
CCD Camera
1/3” LXR CCD with Mechanical Filter
Filter
Dual-window mechanical type
Resolution
High resolution 550 TVL
Effective Pixels (NTSC)
811 (H) x 508 (V)
Effective Pixels (PAL)
795 (H) x 596 (V)
Night-Time Sensitivity
0 Lux (infrared on)
Day-Night Switching
Photocell-controlled, automatic
Electronic Iris (NTSC)
1/60 ~ 1/100,000s
Electronic Iris (PAL)
1/50 ~ 1/100,000s
Output Signal
1V P-P composite video, 75 Ohms
S/N Ratio
Greater than 48dB
Gamma 0.45
Lens
IR-corrected, varifocal 5-50mm
Iris
DC auto-iris
Iris Control
Externally adjustable auto-iris
Lens Control
Externally adjustable zoom, focus
LEDs
Even-distribution infrared array
LED control
Photocell
Wavelength 850nm
Number of LEDs
30
Voltage
12 to 24 VDC or VAC
Power Draw
8W max (infrared on)
Construction
Robust aluminum extrusion
Finish Anodized
silver
Operational Temp.
-30ºC to +55ºC | -22ºF to +131ºF
Sunshield Included
as
standard
Power Supply
Not included
Weight 1.7kg
(3.8lbs)
Dimensions
Φ
98mm x 202mm (L)
Environmental
Designed to IP66
Subject to change without notice
Contact Information
Americas
Bosch Security Systems, Inc.
850 Greenfield Road
Lancaster, Pennsylvania 17601
USA
Te1 888-289-0096
Fax +1 585-223-9180
Email: [email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven,
The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
[email protected]
www.boschsecurity.com
Asia-Pacific:
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone: +65 6319 3450
Fax: +65 6319 3499
[email protected]
www.boschsecurity.com
© Bosch Security Systems, Inc. 2009; Data subject to change
without notice.
Lens Adjustments
•
Remove cap
•
Adjust the iris
level.
•
Re-attach cap
(b)
(c)
(a)
Zoom
Focus
Dip switch
