Bosch WZ14, Installation Manual

Page: 9 / 24

WZ14 Integrated IR Bullet Camera Safety | en 9
Bosch Security Systems, Inc. Installation Manual | 2.0 | 2010.12
safety ground are connected and grounding loops are causing
interference in the video signal, use an isolation transformer
(available separately from Bosch).
Video loss - Video loss is inherent to digital video recording;
therefore, Bosch Security Systems cannot be held liable for any
damage that results from missing video information. To
minimize the risk of lost digital information, Bosch Security
Systems recommends multiple, redundant recording systems,
and a procedure to back up all analog and digital information.
1.4 FCC & ICES compliance
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules . Operation is
subject to the following conditions:
–
this device may not cause harmful interference, and
– this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a
Class A
digital device, pursuant to Part 15
of the FCC Rules and ICES-003 of Industry Canada . These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial
environment . This equipment generates, uses, and radiates
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct
the interference at his expense.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
CAUTION!
Connecting System ground to Safety ground may result in
ground loops that can disrupt the CCTV system.