en
Changing programme default settings
24
Starching
Note:
The laundry should not be
treated with fabric softener.
Liquid starch can be used in all wash
programmes. Pour starch into the
dispenser
M
according to
manufacturer’s specifications
(if required, clean beforehand).
Dyeing/Bleaching
Dye in household quantities only. Salt
may attack stainless steel! Observe
specifications of the dye manufacturer!
Do not
bleach laundry in the washer
dryer!
Soaking
1.
Pour soaking agent/detergent into
dispenser
II
according
to the manufacturer’s instructions.
2.
Set the programme selector to
Cottons
i
60°C
and select
A
Start
/Reload.
3.
After approximately 10 minutes
select
A
Start/
Reload
.
4.
After the required soaking time,
reselect
A
Start
/Reload if the
programme is to be continued or
change the programme.
Note:
Load laundry of the same colour. No
additional detergent is required,
the soaking solution is used for
washing.
0
Changing programme
default settings
Cha
ngi
ng
pr
ogr
amme
def
aul
t
set
ti
ngs
You can change the default settings for
selected programmes. The settings can
be changed even while the selected
programme is running.The effects
depend on the progress of the
programme.
°C (Temperature)
(
The indicated washing temperature
can be changed. The maximum
selectable washing temperature varies
depending on the selected programme.
Overview of programmes
~
Page 20
0
(Finish in)
0
Delays the Finish in time (end
of programme).
Note:
The respective programme duration is
displayed by selecting the programme.
The programme duration is
automatically adjusted while the
programme is running if the programme
duration needs to be changed, e.g. due
to changes in the programme default
settings.
Before the programme starts, the end of
the programme can be preselected in
hourly increments up to a maximum of
24h
.
www.devicemanuals.eu/
