background image

en

    Installation and connection

38

Installation area

Note: 

Stability is important to prevent 

the washer dryer from wandering!

The installation area must be firm 

and level.

Soft floors and floor coverings are 

not suitable.

To ensure good drying results, 

ensure that the room is well 

ventilated.

Installing the appliance on 

a base or on a wooden joist 

ceiling

Caution!

Damage to the appliance

The washer dryer may wander during 

the spin cycle and topple or fall off its 

base.

Always secure the washer dryer feet 

with holding brackets.

Holding brackets:  order no. 

WMZ 2200, WX 9756, CZ 110600, 

Z 7080X0.

Note: 

If installing on a wooden joist 

ceiling:

If possible, install the washer dryer in 

a corner.

Screw water-resistant wooden board 

(min. 30 mm thick) to the floor.

Installing the appliance under/

between kitchen units

:

Warning

Risk of electric shock!

Danger of death if live parts are 

touched.

Do not remove the appliance cover.

Build under/build in before connection 

to the power supply.

:

Warning

Risk of scalding!

During the drying phase, warm air is 

emitted at a temperature of 

up to 60 °C.

Notes

Required dimensions:

a = 650 mm

b = 620 mm

c = 850 mm

Only install the washer dryer under a 

continuous worktop connected firmly 

to the adjacent cupboards.

Ventilate the installation area well, 

otherwise the optimum drying results 

will not be achieved. Dimensions of 

the ventilation openings (to be 

provided on one side, depending on 

the circumstances). 

Opening cross-section: 

d x e = 200 mm x 100 mm. 

Height above floor: f = 365 mm. 

Distance between wall and 

appliance: 50 mm.

Removing the transportation 

protection devices

Caution!

Damage to the appliance

Before using the washer dryer for the 

first time, it is essential to remove all 

4 transportation protection devices. 

Keep the transportation protection 

devices. The washer dryer is 

secured for transportation with 

transportation protection devices. 

Transportation protection devices 

which have not been removed may 

damage the drum, for example, 

while the washer dryer is running.

D

E

F

I

G

H

Summary of Contents for WVH28420SN













































Reviews: