Lift the door glass and the inner ring from the door.
Lift the outer door glass cover from the outer door frame.
5.1.9 Reversing
door
hinge
The door hinge can easily be reversed from factory right hinge to left
hinge position without any parts or kit. Complete instructions are
available separately – a shortened summary of those instructions are
copied here.
1) Remove door (5.1.7) and place it (front side down) on a protected
surface to avoid scratching the outer door frame and door glass.
Make sure hinge plastic bushings remain on the hinge.
2) Disassemble door (5.1.8) until only outer door frame and outer
door glass cover remain, including removing single screws under
the hinge and latch covers.
3) Rotate outer door frame and outer door glass cover 180º. All parts
will be reassembled in the same position and order they were
disassembled – when reassembly is completed, the hinge will be
rotated 180º.
180º
702_58300000143767_ara_en_a
Page 18 of 33
