4.1.17 Round button assembly
The three (3) round buttons are joined by delicate plastic rods. Be
careful installing or removing buttons so button joining rods aren’t
broken.
4.1.18 Door glass cover
Complete door assemblies are not available. However, all door
components can be readily disassembled and replaced, including the
outer door glass cover and inner glass bowl.
4.1.19 Front felt drum seal
Dryers have a self-adhesive, Teflon coated, felt front seal which can
be replaced. When replacing the seal, make sure all old adhesive is
removed and no new adhesive gets onto the drum. Any excess
adhesive or residue may cause squeaking.
If the seal doesn’t fit snugly against the drum, it can be reshaped.
After the seal is attached to the drum, wet the seal thoroughly using a
spray bottle. Shape the seal toward the drum and run the dryer 20
minutes on a heated timed dry setting. Since felt shrinks when dried
rapidly, the seal will shrink to the drum and fit it snugly.
Felt seal
Drum wheels
4.1.20 Empty drum detection
Dryers shut down after 11 minutes if no moisture is detected. Dryers
can be immediately restarted.
702_58300000143767_ara_en_a
Page 12 of 33
