background image

en

    Installing and connecting the appliance

16

Before using the appliance for 

the first time

Before you switch on the appliance:

Check that there is no visible damage to 

the appliance. Do not operate the 

appliance if it is damaged. Should you 

have any problems, please contact your 

specialist dealer or our customer 

service.

Note:  

Once the appliance has been 

properly installed and connected, it is 

ready to use. No further steps are 

necessary.

Optional accessories

Order optional accessories

*

 from the 

after-sales service:

Basket for woollens:

Dry or air individual woollen items, 

sports shoes and soft toys in the 

basket for woollens.

– Order number: 

WMZ20600

.

Platform:

For easier loading and unloading, 

raise your dryer with a platform.

You can transport laundry with the 

laundry basket integrated into the 

platform drawer.

– Order number: 

~

.

Washer-dryer stack connection kit:

To save space, the dryer can be 

placed on top of a suitable washing 

machine of the same width and 

depth. 

Only this connection kit may be used 

to secure the dryer to the washing 

machine. 

– Order number with pull-out 

worktop: 

WTZ27400

– Order number without pull-out 

worktop: 

WTZ27410

.

Condensate drainage kit:

You can discharge the condensation 

water into the waste-water system 

via a drain hose. If you choose to 

discharge the condensation water 

into the waste-water system, you will 

not need to empty the condensation 

container during the drying 

programme or after each time you 

use the dryer.

– Order number: 

WTZ1110

* Depending on the appliance features

Summary of Contents for WTR85V90CL

















































Reviews: