background image

Appliance settings    

en

31

7.

Rinse off fluff under warm, running 

water.

8.

Dry the two parts of the fluff filter, 

snap them shut and reinsert the 

filter.

Caution!

Material damage/damage to the 

appliance

If you operate the appliance without a 

fluff catcher (e.g. fluff filter, fluff depot, 

depending on appliance specifications), 

or if the fluff catcher is incomplete or 

defective, this may result in damage to 

the appliance.

Do not operate the appliance without a 

fluff catcher, or with a fluff catcher that is 

incomplete or defective.

2

Appliance settings

Appliance settings

You can activate/deactivate or change 

the appliance settings directly.

Childproof lock

You can activate or deactivate the 

appliance's childproof lock. You can 

activate the childproof lock to prevent 

the control panel from accidentally 

being operated.

Activate/deactivate the appliance 

setting as follows:

Press and hold 

(Time Dry) 

5

 

and 

(Ready in)

 ñ

 at the same time for 

approx. three seconds.

E

 is shown/hidden in the display.

The childproof lock is activated/

deactivated.

Notes

You can activate the childproof lock 

at any time after you switch on the 

appliance.

The childproof lock remains active 

even after the appliance has been 

switched off. In order to operate the 

control panel when you turn on the 

appliance, you need to deactivate 

the childproof lock.

Summary of Contents for WTR8528PSN

















































Reviews: