background image

en

    Technical data

36

J

 Technical data

Technical data

Dimensions

85 x 60 x 60 cm
Height x width x depth

Weight

:

Approx. 48 kg

Maximum load

:

8 kg

Condensate container

:

4.8 l

Connected voltage

:

220 - 240 V

Connected load

:

Max. 625 W

Fuse

:

10 A

Drum interior light

*

Ambient temperature

:

5 - 35 °C

Power consumption when 

switched off

:

0.10 W

Power consumption when 

ready for use (left-on mode)

:

0.75 W
This product contains light sources from 

energy efficiency class F. These light 

sources are available as a spare part 

and must only be replaced by trained 

specialist staff.

J

After-sales service

After-sales service

After-sales service

If you cannot rectify the fault yourself 

(faults, what to do?), please contact our 

after-sales service. We will always find 

an appropriate solution to avoid 

unnecessary visits by engineers.
The contact information for your nearest 

after-sales service can be found here or 

in the enclosed after-sales service 

directory.
Please provide after-sales service with 

the dryer's product number (E-no.) and 

production number (FD).

You can find this information on the 

inside of the dryer door or on the rear of 

the dryer.

Trust the expertise of the 

manufacturer.

Contact us. You can therefore be sure 

that the repair is carried out by trained 

service technicians who carry original 

spare parts.

* Depending on the model

(1U

)'

Summary of Contents for WTH85V88DN









































Reviews: