background image

en

    Laundry

18

Z

 Laundry

Laundry

Preparing the laundry

:

Warning

Risk of explosion/fire!

Remove any cigarette lighters and 

matches from pockets.

Caution!

The dryer drum and fabrics could be 

damaged.

Remove all objects from pockets and 

observe the following information:

Tie cloth belts, apron strings, etc. 

together or use a laundry bag.

Close zips, hooks and eyelets and 

buttons. Button up large items of 

laundry, such as covers.

Remove any metal objects, such as 

paper clips, from pockets.

To ensure a consistent drying result, 

sort laundry by fabric type and 

drying programme.

Always dry very small items of 

laundry, e.g. babies' socks, together 

with large items such as towels.

Knitted fabrics such as T-shirts and 

jerseys often shrink the first time they 

are tumble-dried. Use a gentle 

programme.

Do not overdry easy-care laundry. 

This increases creasing of the 

laundry.

Use timed programmes for single 

garments.

Some detergents and care products, 

e.g. starch or softeners, contain 

particles which may be deposited on 

the moisture sensor. This may impair 

the sensor function and in 

consequence the drying result.

Notes

– When washing laundry to be 

tumble-dried, use the correct 

amount of detergent and care 

products as specified in the 

manufacturer's instructions.

– Clean the moisture sensor 

regularly 

~

 Page 27

.

Sorting washing according to:

c

 Suitable for tumble drying

a

 Dry at normal temperature

`

 Dry at low temperature

b

 Do not tumble-dry

Note:  

Do not load laundry from the 

washing machine directly into the 

tumble dryer. Sort the spun laundry 

before placing it in the dryer drum.

If you dry thin, thick and multi-layer 

fabrics together, they will dry to differing 

degrees. To achieve an even drying 

result, you should therefore only dry 

together laundry of the same type of 

fabric and structure. If you feel that the 

laundry is still too damp, you can select 

a timed programme for subsequent 

drying 

~

 Page 19

.

Caution!

Possibility of material damage to the 

dryer or laundry.

Do not tumble-dry the following 

fabrics:

Laundry contaminated with oil.

Unwashed fabrics.

Non-breathable fabrics (e.g. rubber-

coated).

Easily damaged fabrics such as silk, 

synthetic curtains.

Summary of Contents for WTG86401GB

































Reviews: