Bosch WTA74202ID, Installation And Operating Instructions Manual

Page: 29 / 40

Operating the appliance
en
29
Changing the program or
adding laundry
You can remove or add laundry and
change or alter the program at any time
during drying.
1.
To pause the program, open the
dryer door or press the Start button.
2.
Add or remove laundry.
3.
Select another program or an
additional function, if required.
4.
Close the dryer door.
5.
Press the Start button.
Note:
The program duration in the
display panel is updated depending on
the load and residual moisture in the
laundry. The values displayed may
change after the program is changed or
the load is adapted.
Program interruption
The program can be interrupted at any
time; to pause, open the dryer door or
press the Start button.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the program, you must
remove the laundry items and spread
them out so that the heat can disperse.
Program end
“Ÿš
appears in the display panel.
Removing laundry and
switching off the dryer
1.
Remove the laundry.
2.
Turn the program selector to the "off"
position.
Clean the fluff filter
Note:
During drying, fluff and hair from
the laundry is trapped by the fluff filter. If
the fluff filter is blocked or dirty, this
reduces the flow of air, which prevents
the dryer from achieving its maximum
performance. Clean fluff filters also
reduce energy consumption and the
drying time.
Clean the fluff filter
after each
drying
cycle:
1.
Open the dryer door and remove all
fluff from the door.
2.
Remove the fluff filter.
3.
Remove the fluff from the recess in
the fluff filter.
Note:
Ensure that no fluff falls into
the open shaft.
4.
Open the fluff filter and remove all
the fluff.
5.
Rinse away the fluff under running
water or clean the fluff filter in the
dishwasher.