3
4
End of programme
as soon as the
Ready/Anti-Crease
!
/
"
indicator light flashes
Interrupting the programme
Loading or removing laundry
The drum and door may be hot.
The drying programme can be interrupted briefly for loading or removing laundry. The selected
programme must then continue to run to the end.
1. Open the door; the drying process is interrupted.
2. Load or remove laundry and close the door.
3. If required, select a new programme and additional functions.
4. Press the
Start
/Stop button.
Cleaning the fluff filter
Clean the fluff filter after each drying cycle.
1.
Open the door and pull out the fluff filter.
2.
Remove the fluff (brush your hand over the fluff filter).
If the fluff filter is very dirty or blocked, wash it out with warm water and
dry thoroughly.
3.
Insert the fluff filter so that you hear it engage.
4.
Remove fluff from door/door area.
Switching off the dryer
Turn the programme selector to
o (Off)
.
Do not leave laundry in the dryer.
Removing the laundry
Your dryer has an automatic anti-crease function. The drum is moved at set intervals for 30 minutes after
the programme has ended. Laundry remains loose and fluffy (for 90 minutes, if additional
Easy-iron
function is selected - depending on model).
... and adapt to individual requirements
Inspecting
the dryer
Sorting and loading laundry
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Selecting and adjusting the programme
Drying
Control panel
Select the drying programme ...
Press the Start/Stop button
1
2
3
Connecting the
mains plug
Drying
(c
'c
)c
+
Drum
Only operate the dryer with the
fluff filter inserted.
Fluff filter
o
ʋ
ʋ
ˎ
'
, e.g. polyacrylic, polyamide, elastane or
ˎ
after the programme has
For a detailed programme overview, -> page 7.
Before using the dryer for the first time
run the drying cycle without any laundry -> page 7.