Set up and connect NL
3.
Push the water drain hose onto
the connection as far as it will go.
6.
Insert the stopper into the recess
at the top.
7.
4.
Emptying the condensed water container
8.
Connect the appliance to the
water outlet.
Tip: To collect the condensed water
again in the condensed water
container (e.g. if the location of the
device is changed), undo these steps
in reverse order.
Connection types for water drainage
5.
Remove the stopper from the
bottom.
PAY ATTENTION!
With a clogged or closed drain,
accumulated waste water can flow
back into the unit.
▶
Before using the device, ensure
that the waste water drains quickly
and clears blockages.
Drain in a
siphon.
The connection position
tie with a
hose clamp
(12-22 mm) bore
gene.
the water
feeding hose with
a hose guide
thing on minimum
80 cm and maximum
15
