NL Troubleshooting
Malfunction
Cause and Troubleshooting
Automatic self-cleaning flushes the heat exchanger
from the device.
1.
No malfunction.
2.
Do not pull out the condensed water container.
3.
Do not abort the program.
Water is leaking.
The appliance is not leveled properly.
▶
Adjusting the device
Water drain hose is not connected correctly.
▶
Make sure that the water drain hose is connected
correctly.
"Connecting the water drain hose", page 14
Laundry is too damp.
Unsuitable program set for the type of fabric.
▶
Set a time program for post-drying.
Power supply has failed.
▶
Check whether the interior lighting or other
appliances are working.
The load quantity is too high.
▶
Pay attention to the maximum load of the
Warm laundry feels damper than it actually is at the
end of the program.
1.
Remove the laundry from the drum immediately after
drying.
2.
Spread out the items to let them cool.
Inappropriate drying target set.
▶
"Change drying target", page 25
Drying target not adjusted.
▶
"Adjust drying target", Page 25.
Loading quantity too little.
▶
Set a time program for post-drying.
Humidity sensor contaminated.
▶
"Cleaning the humidity sensor", page 43.
Drying process aborted and condensed water container
filled.
1.
"Emptying the condensate container", page 33
2.
"Push in the condensation container",
3.
"Starting the program", Page 31.
48
