Bosch WQG24500ES, User Manual And Installation Instructions

Page: 47 / 56

Troubleshooting
en
47
Fault Cause and troubleshooting
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
▶
Ensure that the water drain hose is connected cor-
rectly.
→
"Connecting the water drain hose", Page 14
The programme does
not start. Childproof lock is activated.
▶
→ "Deactivating the childproof lock", Page 33
You have not pressed ⁠
Inicio/Pausa+Carga
.
▶
Press ⁠
Inicio/Pausa+Carga
.
No programme set.
1.
→ "Setting a programme", Page 29 .
2.
→ "Starting the programme", Page 30 .
The length of the pro-
gramme changes dur-
ing the drying cycle. The programme operation is optimised electronically.
This may change the programme duration.
▶
Not a fault – no action required.
Pumping noise. Condensation pump active.
▶
Not a fault – normal operating noise.
Buzzing noise. Compressor ventilation active.
▶
Not a fault – normal operating noise.
The drying time is too
long. Fluff filter is soiled.
▶
→ "Cleaning the fluff filter", Page 30
The ambient temperature is greater than 30 °C.
▶
Ensure that the ambient temperature is lower than
30 °C.
The ambient temperature is lower than 15 °C.
▶
Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.
▶
Ventilate the appliance's installation location.
Appliance air inlet is blocked.
▶
Ensure that the air inlet on the appliance is kept
clear.
Heat exchanger is soiled.
▶
→ "Running the basic appliance care programme
on the appliance", Page 38