en
Installation and connection
14
Installation loca-
tion
Requirements
Against a wall
Do not trap the
hoses between
the wall and the
appliance.
4.4 Water drain hose
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. Use the water drain
hose to drain away excess condens-
ation directly into the waste water
system.
Notes
¡
Operate this appliance using the
water drain hose provided. If you
connect the water drain hose
→
regularly empty the condensation
container →
.
¡
You can order this optional
→
from
our customer service.
Connecting the water drain hose
If you do not want to regularly empty
the appliance's condensation con-
tainer, connect the water drain hose.
ATTENTION!
When operating the appliance
without the water drain hose being
connected properly, liquid may leak
out of the connecting piece.
▶
Before operating the appliance,
connect the water drain hose prop-
erly to the connecting piece.
Requirements
¡
The appliance and the accessory
have been unpacked.
→
¡
The appliance is installed at the in-
stallation location.
→
"Requirements for the installa-
1.
Pull out the condensation hose
from the connecting piece.
The condensation hose is connec-
ted to the connecting piece at the
factory.
Note:
When removing the con-
densation hose, liquid may leak
out of the connecting piece.
2.
Push the condensation hose into
the holder.
