manualshive.com logo in svg

Bosch WNA14400ID, User Manual And Installation Instructions, Page: 30 / 48

Share
Download
Bosch WNA14400ID User Manual And Installation Instructions Download Page 30

en 

operation

30

a

The display shows either the pro-
gramme duration or the "Ready in"
time.

a

After the programme has ended,
the display shows: End or "0".

2.

If "0" is displayed, the laundry is
not spun. Press 

Start / Pause

 to

drain the water and to start the
Spin programme.

3.

To remove the laundry without
spinning, press 

Start / Pause

 after

approx. 1 minute. The programme
stops before spinning, the door
lock opens and the laundry can be
removed.

Note: 

If appears, the appliance cools

the laundry.
When goes out, the laundry has
cooled down.

14.7 Changing the activated

"Ready in" time

If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.

Requirements

¡

The programme is set. 
→ 

"Setting a programme", Page 29

¡

The "Ready in" time is set and ac-
tivated. 
→ 

"Buttons", Page 21

1.

Press 

Start / Pause

.

The activated "Ready in" time is
paused.

2.

Press 

Ready In

 repeatedly until the

display indicates the desired
"Ready in" time.

3.

Press 

Start / Pause

.

The changed "Ready in" time is ac-
tivated.

14.8 Soaking laundry

Note: 

No additional detergent is re-

quired. The washing solution is then
used for washing.

1.

Start the programme.

2.

To pause the programme, after ap-
prox. 10 minutes, press

Start / Pause

.

3.

To resume the programme, after
the desired soaking time, press

Start / Pause

.

14.9 Adding laundry

1.

Press 

Start / Pause

.

During the washing cycle, the ap-
pliance pauses.
During the drying cycle, the appli-
ance checks whether it is possible
to add laundry.

Note: 

If   appears, it is not pos-

sible to add laundry.
When   goes out, it is possible to
add laundry.

2.

Open the appliance door.

3.

Add or remove laundry.

4.

Close the appliance door.

5.

Press 

Start / Pause

.

14.10 Cancelling the pro-

gramme

1.

Press 

Start / Pause

.

2.

Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start

the 

Rinse

 programme.

– If the water level is high, start

the 

Spin

 programme or select a

suitable programme for draining. 
→ 

"Programmes", Page 24

Summary of Contents for WNA14400ID

















































Reviews:

No comments