Bosch WNA13400EU, Instructions For Use And Installation

Page: 40 / 60

de
Operate the device
Start the program
Add / remove laundry
The key A. Start / Reload (start / post
lay) Press and hold for 1 to 2 seconds and
then release. The program starts and the
washing machine door is locked.
After the program has started, laundry
can be added or removed if necessary
(only applies to washing programs).
The time until the program starts is
counted down in the display panel. After
the program has started, the program
duration is displayed. In addition, the
symbols for the program progress light up.
The key A. Start / Reload (start / post
lay) The device checks whether it can be
added.
The following can be shown in the
display field:
Parental controls
■
The symbol O goes out. Reloading is
possible.
The symbol O shines. Reloading is not
possible.
The device can be secured against
inadvertent changing of the settings. To do
this, activate the childproof lock.
■
To continue the program, press the
button A. Start / Reload (start / reload
gene) Press. The program continues
automatically.
Activating the childproof lock: After the
program has started, press the buttons
Hints
( SpeedPerfect and ñ Finished in /
Time dry Hold down for 3 seconds. The
symbolE. lights up in
display field.
■
When adding more laundry, do not
leave the door open for a long time -
water that escapes from the laundry
can run out.
■
In the event of a high water level, high
temperature or a rotating drum, the
door remains locked for safety reasons.
It is then not possible to add more.
On
■
E. lights up: The childproof lock is
activated.
E. flashes: If the program and the
program settings are adjusted while
the child lock is activated.
■
A notice: At the end of the program, “Ÿš
displayed. The washing machine door is
unlocked. The symbolE. remains lit to
remind you to deactivate the child lock.
Change program
If the wrong program has been started by
mistake, the program can be changed as
follows:
1. The key A. Start / Reload (start /
reload) touch.
Deactivating parental controls:
2. Choose another program.
The button's ( SpeedPerfect and ñ
Finished in / Time Dry keep pressed down,
3. The key A. Start / Reload (Start /
Reload) touch again. The new
program starts all over again.
up the symbol E. is no longer displayed.
A notice: If drying is activated, the
program can be changed directly with the
program selector.
40