Faults and what to do about them.
en
37
Odours in the washing
machine.
Depending on the model, run the
Drum Clean 90 °C
or
ü
Cottons 90 °C
program without laundry.
Add washing powder or a detergent containing bleach.
Note:
To prevent foaming, only use half the amount of detergent recommend-
ed by the detergent manufacturer. Do not use detergents designed for wool or
delicates.
The
Å
symbol lights up
in the display panel. Foam
may also be leaking from
the detergent drawer.
Have you used too much detergent?
Mix one tablespoon of fabric softener with 1/2 litre of water and pour it into
compartment
II
(not suitable for outdoor clothing, sportswear or items stuffed
with down).
Use less detergent in the next wash cycle.
Loud noises, vibrations
and machine "movement"
during the spin cycle.
■
Is the appliance aligned? Align the appliance.
~
Page 16
■
Are the appliance's feet fixed? Secure the appliance's feet.
~
Page 16
■
Have the transport braces been removed? Remove the transport braces.
~
Page 13
The display panel/indica-
tor lights do not work
while the appliance is run-
ning.
■
Has there been a power failure?
■
Have the fuses blown? Reset/replace the fuses.
■
If the fault occurs repeatedly, call customer services.
There is detergent resi-
due on the laundry.
■
Some phosphate-free detergents contain water-insoluble residue.
■
Select
Rinse
or brush the laundry after washing.
The
è
symbol lights up
in the display in pause
mode.
■
The water level is too high. It is not possible to add laundry. Close the door
immediately, if necessary.
■
Press the
A
button to continue the program.
In the pause mode, the
è
symbol in the display
is off.
The door is unlocked. It is possible to add laundry.
If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required:
■
Switch off the appliance and pull out the mains plug.
■
Turn off the tap and call customer services.
Faults
Cause/Remedy
