en
Cleaning and servicing
40
1.
Since water may remain in the
drain pump, unscrew the pump
cap carefully.
‒
The filter insert in the pump
housing may become stuck due
to coarse particles of dirt.
Loosen the dirt and remove the
filter insert.
2.
Clean the interior, the thread on
the pump cap and the pump hous-
ing.
3.
Ensure that the impeller in the
drain pump can rotate.
4.
Screw the pump cap as far as it
will go.
90°
The handle on the pump cap must
be in a vertical position.
5.
Insert the pump cap and screw it
on as far as it will go.
90°
The handle on the pump cap must
be in a vertical position.
6.
Install the base panel.
