Bosch WGG256M7NL, User Manual And Installation Instructions

Page: 46 / 56

NL Troubleshooting
Malfunction
Cause and Troubleshooting
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶
Make sure that the drain pipe and the water
drain hose are not kinked or pinched.
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the program Centrifuge.
Unbalance control system compensates for
imbalance through reduced spin speed.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the program Centrifuge.
Detergent residue on
the damp laundry.
Detergents may contain water-insoluble substances,
which deposit on the laundry.
▶
Start the program To rinse.
Detergent residue on
the dry laundry.
Detergents may contain water-insoluble substances,
which deposit on the laundry.
▶
Brush the laundry after washing and drying.
At the water supply
feed hose is leaking water.
The water inlet hose is not correctly / firmly
connected.
1.
Connect the water supply hose correctly. Connect
water supply hose
2.
Tighten the coupling properly.
Water is leaking from
the water drain hose.
Water drain hose is damaged.
▶
Replace the damaged water drain hose.
Water drain hose is not connected correctly.
▶
Connect the water drain hose correctly. Connection types for
water drainage
46