Sensors
en
41
■
3: The volume of the button signals.
■
4: Switching the drum care
information signal on/off.
Exiting setting mode
You can now end the process and set
the programme selector to the
Off
position. The settings are saved.
H
Sensors
Sensors
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note:
Place large and small items of
laundry evenly in the drum.
Aqua-Sensors
Depending on the programme and
model
During a rinse cycle, the Aqua sensor
checks the turbidity of the rinsing water
(turbidity is caused by dirt and
detergent residue). The duration and the
number of rinse cycles depend on the
turbidity of the water.
2
Cleaning and
maintenance
Cleaning and maintenance
:
Warning
Risk of death!
There is a risk of electric shock if touch
live components.
Turn the programme selector to
Off
.
Pull out the mains plug.
Caution!
Fire and explosion hazard!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
The appliance may be damaged!
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
appliance.
Do not use cleaning agents that contain
solvents.
Appliance housing/control
panel
■
Remove the detergent residue
immediately.
■
Wipe the housing and the control
panel with a soft, damp cloth.
■
Do not use abrasive cloths, sponges
or detergents (stainless steel
cleaner).
■
Do not clean the appliance with a
water jet.
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
Ž
on
Œ
off
Summary of Contents for WGA144A0AU
Page 55: ...6 ...