1 609 929 X43 | (3.11.10)
Bosch Power Tools
20
| English
Operation
Initial Operation
f
Protect the measuring tool against moisture and
direct sun light.
Switching On and Off
f
Before switching the measuring tool on, make sure
that the sensor area 5 is not moist.
If required, dry
the measuring tool using a soft cloth.
f
Do not subject the measuring tool to extreme tem-
peratures or variations in temperature.
As an ex-
ample, do not leave it in vehicles for longer periods.
In case of large variations in temperature, allow the
measuring tool to adjust to the ambient tempera-
ture before putting it into operation.
f
Avoid heavy impact to or falling down of the meas-
uring tool.
To
switch on
the measuring tool, press the On/Off but-
ton
4
.
After a brief self-check, the measuring tool is ready for
operation. The operational readiness is indicated by a
check mark behind the
“AutoCal”
calibration indicator
d
.
To
switch
the measuring tool
off
, press the On/Off but-
ton
4
.
When no measurements are carried out for approx.
10 minutes, the measuring tool switches off automati-
cally in order to extend the service life of the batteries.
f
Before drilling, sawing or routing into a wall, pro-
tect yourself against hazards by using other infor-
mation sources.
As the measuring results can be in-
OBJ_BUCH-308-002.book Page 20 Wednesday, November 3, 2010 9:44 AM
