Bosch WAY32890SN Instruction Manual And Installation Instructions Download

Page: 68 / 76

Before the 1st washing

The washing machine was inspected thoroughly before leaving
the factory. To remove any water left over from testing
procedures, the first washing cycle should be carried out

without

laundry in the machine.

The washing machine must have been installed and connected
properly. See chapter

Installing

Page 65

Check the machine.

Never switch on a damaged machine. Inform your customer
service.

Page 52

Fill dispensers

Page 34

Remove protective film from the fascia.

Insert mains plug.

Turn the tap on.

Switch on the appliance.

Close the washing machine door. Do not load any washing.

To prevent unused detergent from flowing into the outlet
during the first wash: Pour 1 litre of water into dispenser

u v

and start the

Drain

programme.

Select and start the

Cottons

90 °C

programme.

10.

When the programme ends, switch off the appliance.

Your washing machine is now ready for use.

Summary of Contents for WAY32890SN













































































Search results

Summary of Contents for WAY32890SN

Reviews:

Related manuals for WAY32890SN

Brands by name

Popular brands

Bosch WAY32890SN, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WAY32890SN

Reviews:

Related manuals for WAY32890SN

Brands by name

Popular brands