en
Basic operation
40
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.6 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows:
-0-
.
13.7 Soaking laundry
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
.
3.
To resume the programme, after
the desired soaking time, press
.
13.8 Adding laundry
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Press
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
.
13.9 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Press
.
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse
programme.
– If the water level is high: Start
the
Spin
or
Drain
programme.
3.
Remove the laundry.
13.10 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1.
Set the
Spin
or
Drain
programme.
2.
Press
.
13.11 Unloading the laundry
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Open the door.
Summary of Contents for WAXH2KM0SN
Page 56: ...en Cleaning and servicing 56 3 Connect the water inlet hose and check for leaks ...
Page 74: ......
Page 75: ......
