Bosch WAXH2KI0SN, User Manual And Installation Instructions

Page: 48 / 64

en
Troubleshooting
48
Fault Cause and troubleshooting
"E:35 / -10" The appliance is leaking.
▶
Turn off the water tap.
▶
Call the after-sales service.
→
"Customer Service", Page 58
The detergent drawer has not been pushed in as far
as it can go.
▶
Push the detergent drawer in as far as it will go.
The pump unit is not inserted.
1.
Insert the pump unit into the detergent drawer.
→
"Cleaning the detergent drawer", Page 41
2.
Push the detergent drawer in as far as it will go.
Detergent dosage is too high.
▶
Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mix-
ture into the compartment for manual dosing (not
for outdoor clothing, sportswear or items stuffed
with down).
▶
If intelligent dosing is activated, reduce the basic
dosage →
Page 36 .
▶
If you dose manually, reduce the amount of deter-
gent for the next washing cycle with the same load.
lights up. The temperature is too high.
▶
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 33
Water level is too high.
▶
Select a suitable programme for draining.
→
"Programmes", Page 27
Laundry is caught in the door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press to start the programme.
flashes. Door is not closed.
1.
Close the door.
2.
Press to start the programme.
All other error codes. Malfunction
▶
Call the after-sales service.
→
"Customer Service", Page 58