Home Connect
en
45
4.
Close the dispenser lids.
Note:
To prevent the detergent dry-
ing out or drying up, do not leave
the dispenser lids open for a long
period of time.
5.
Push in the detergent drawer.
6.
Adjust the basic dosage
→
.
Dispenser contents
When it leaves the factory, the dis-
penser is set
for fabric softener .
Alternatively, you can also use this dis-
penser
for a second liquid deter-
gent .
Notes
¡
If you change the content of the dis-
penser, the basic dosage for this
dispenser is reset.
¡
If you use both dispensers for liquid
detergent, you must select a dis-
penser which is to be used during
washing.
You can change dispenser contents in
the basic settings.
→
"Changing the basic settings",
Basic dosage
You can adjust the preset basic
dosages for liquid detergent and fabric
softener.
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the de-
gree of soiling of the laundry.
Always set a basic dosage that corres-
ponds to the dosage for a standard
load of 4.5 kg.
→
You can individually adjust the basic
dosages for each dispenser.
→
"Changing the basic settings",
Home Connect
This appliance is network-capable.
Connecting your appliance to a mobile
device lets you control its functions via
the Home Connect app, adjust its basic
settings and monitor its operating
status.
Home Connect services are not avail-
able in every country. The availability of
the Home Connect function depends
on the availability of Home Connect
services in your country. You can find
information about this at: www.home-
connect.com.
To use Home Connect, first set up a
connection to the WLAN home network
(Wi-Fi
1
) or LAN home network and the
Home Connect app.
There are various ways to connect to
your home network, depending on the
features of your appliance:
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 46
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
