en
Home Connect
46
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi) without
WPS function", Page 46
The Home Connect app will guide you
through the entire login process. Follow
the instructions in the Home Connect
app to configure the settings.
Tips
¡
Please consult the Home Connect
documents supplied.
¡
Please also follow the instructions in
the Home Connect app.
Notes
¡
Please note the safety precautions in
this instruction manual and make
sure that they are also observed
when operating the appliance via the
Home Connect app.
→
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible to
operate the appliance using the
Home Connect app.
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
Using your router's WPS function is the
simplest way to connect the appliance
to your home network.
Requirement:
If your router has a WPS
function, you can connect the appli-
ance to your WLAN home network (Wi-
Fi) automatically.
1.
Press and hold for approx. 3
seconds.
a
You are now in the Home Connect
menu.
2.
Select
Connect
.
3.
Confirm the message in the display.
4.
Press the WPS button on the router
within the next 2 minutes.
Take note of the information in the
documents for your router.
a
flashes in the display.
a
The appliance attempts to connect
to your WLAN home network.
a
If the display shows
Connected
and
lights up permanently, the appli-
ance is connected to the home net-
work.
5.
Connect your appliance to the Home
Connect app. →
Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network (Wi-
Fi) manually. The appliance quickly
sets up its own Wi-Fi network. You can
connect a mobile device to the WLAN
network and transfer the network in-
formation for the WLAN home network
(Wi-Fi) to your appliance.
Requirement:
The Home Connect app
is open and you have logged on.
1.
Press and hold for at least
3 seconds.
a
You are now in the Home Connect
menu.
2.
Select
Man. network log-in
.
3.
Select
Connect
4.
Confirm the message in the display.
a
flashes in the display.