Bosch WAX32KH0BY, User Manual And Installation Instructions

Page: 35 / 72

Basic operation
en
35
Water hardness
Hardness range Total hardness in mmol/l German degrees in °dH
soft (I) 0–1.5 0–8.4
medium (II) 1.5– 2.5 8.4–14
hard (III) over 2.5 over 14
Example of a manufacturer's
instructions for detergent
These example values refer to a stand-
ard load of 4–5 kg.
Soiling Light Normal Heavy
Water hardness: Soft/medium 40 ml 55 ml 80 ml
Water hardness: Hard/very hard 55 ml 80 ml 105 ml
The dosages can be found on the man-
ufacturer's packaging.
¡
If you are not using manual dosage,
adjust the dosage to the actual load.
¡
If intelligent dosing is activated, do
not adjust the dosage to the actual
load capacity. The quantity of deter-
gent and fabric softener is automat-
ically calculated via the basic
dosage →
Page 39 and the amount
of laundry detected. The basic
dosage setting must always comply
with the dosage for a load of 4.5 kg.
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Switching on the appliance
▶
Press ⁠ .
It may take a few seconds for the
appliance to switch on.
a
The appliance performs an audible
function test in the detergent drawer.
→
"Noise", Page 60
Note:
The drum is lit up after the door
is opened and closed and once the
programme has started. The light goes
out automatically.
Setting a programme
1.
Set the programme selector to the
required programme →
Page 24 .