Bosch WAW32660SA Page 37 Instruction Manual And Installation Instructions Download

Page: 37 / 60

Additional programme settings

Additional programme

settings

Additional programme settings

An overview of all additional settings,

which can be selected depending on

the programme, can be found from

Page 29

SpeedPerfect

(

Washing in a shorter time while

achieving a washing result that is

consistent with, but uses more energy

than, the selected programme, without

the SpeedPerfect

(

setting.

Note:

Do not exceed the maximum

load.

Overview of programmes

Page 29

EcoPerfect

Energy-optimised washing by reducing

the temperature while achieving a

washing result that is consistent with the

selected programme, without the

EcoPerfect

setting.

Prewash

For heavily soiled laundry.

Notes

■

intelligent dosage is selected

, the

detergent will be dispensed

automatically for the prewash and

the main wash.

■

Set the i-DOS dosage to

medium

prevent overdosing.

■

dosing manually

, allocate

detergent to the prewash and the

main wash. Place detergent for the

prewash in the drum and add

detergent for the main wash to

compartment

Rinse Plus

Additional rinse cycle for particularly

sensitive skin and/or for areas with very

soft water.

Easy Iron

Reduces creasing thanks to a special

spin sequence followed by fluffing and

reduced spin speed.

Note:

The washing's residual moisture

is increased.

Summary of Contents for WAW32660SA





























































Search results

Summary of Contents for WAW32660SA

Reviews:

Related manuals for WAW32660SA

Brands by name

Popular brands

Bosch WAW32660SA, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WAW32660SA

Reviews:

Related manuals for WAW32660SA

Brands by name

Popular brands