background image

Technical data    

en

35

Efficiency test programmes for cotton fabrics

The following programmes (standard programmes, indicated by 

ü

) are suitable for 

cleaning normally soiled cotton fabrics and are the most efficient with respect to 

combined energy and water consumption.

J

Technical data

Tec

hni

cal

 

dat

a

Dimensions:

 

850 x 600 x 590 mm
(height x width x depth)

Weight:

 

70 - 85 kg (depending on model)

Mains connection:

 

Mains voltage 220 - 240 V/50 Hz
Nominal current 10 A
Nominal power 2300 W

Water pressure:

 

100 - 1000 kPa (1 - 10 bar)

Power consumption when switched 

off:

 

0,12 W

Power consumption when ready for 

use (left-on mode):

 

0,43 W

Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010
Pro tempe button

Load

Approximate programme 

duration

ü 

ú

 + 

ü

 EcoPerfect 

F

9 kg

_

 h

ü 

ú

 + 

ü

 EcoPerfect 

F

4,5 kg

^

 h

ü 

û 

ü

 EcoPerfect 

F

4,5 kg

^

 h

Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU with cold 

water (15 °C).

The programme temperature information is based on the temperature stated on the care label for the 

fabrics. The actual washing temperature may deviate from the stated programme temperature for 

energy-saving reasons.

Summary of Contents for WAW24460EU













































Reviews: