![Bosch WAV32M40TH User Manual And Installation Instructions Download Page 52](http://html.mh-extra.com/html/bosch/wav32m40th/wav32m40th_user-manual-and-installation-instructions_52328052.webp)
en
Cleaning and servicing
52
2.
Disconnect the appliance's mains
plug from the power supply.
3.
Loosen the hose clamp and care-
fully remove the water outlet hose.
Residual water may leak out.
4.
Clean the water outlet hose and si-
phon connecting piece.
5.
Reattach the water outlet hose and
secure the connection point using
the hose clamp.
17.8 Clean the water inlet fil-
ters.
Emptying the water inlet hose
In order to be able to clean the filters,
you must first empty the water inlet
hose.
1.
Turn off the tap.
2.
Set a programme, except for
Rinse
,
Spin
or
Drain
.
3.
Start the programme and leave it
to run for approx. 40 seconds.
4.
Switch off the appliance.
5.
Disconnect the appliance's mains
plug from the power supply.
Cleaning the filter on the tap
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
Requirement:
The water inlet hose is
empty.
1.
Remove the water inlet hose from
the tap.
Summary of Contents for WAV32M40TH
Page 54: ...en Cleaning and servicing 54 5 Connect the hose and check for leaks 2 1 ...
Page 69: ......
Page 70: ......
Page 71: ......