Bosch WAU28640TC, Instruction Manual And Installation Instructions

Page: 21 / 52

Positioning and connecting
en
21
Transportation
e.g. when moving home
Preparatory work:
1.
Turn off the water tap.
2.
Reduce the water pressure in the
supply hose.
~
Page 43
3.
Drain any residual water.
~
Page 42
4.
Disconnect the appliance from the
mains.
5.
Remove the hoses.
6.
Empty the dispensers.
Installing the transport locks:
1.
Remove the covers and keep them
in a safe place.
Note:
Use a screwdriver if
necessary.
2.
Insert all four sleeves.
a) Clip the mains cable securely in
the holders.
b) Insert and tighten the screws.
c) Clip the hoses securely in the
holders.
Before switching on the appliance
again:
Notes
■
The support struts
must
be
removed.
~
"Removing the support struts"
on page 16
■
The transport braces
must
be
removed.
~
"Removing the transport locks"
on page 15
■
Pour approx. 1 litre of water into the
left-hand compartment, select the
Rinse
or
Spin
programme and start.
This will prevent detergent from
flowing straight into the drain during
the next wash.