Bosch WAU28540TC, Instruction Manual And Installation Instructions

Page: 35 / 48

Operating the appliance
en
35
Note:
When the programme ends,
End
is displayed. The door is locked.
E
(3
寤
)
and
Õ
remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the
E
(3
寤
) button until
the
E
(3
寤
)
indicator lamp is off.
Adding/removing laundry
After starting the programme, you can
add or remove laundry if necessary.
Touch the
A
button. The appliance
checks whether reloading is possible.
If the following appears on the Touch-
Display:
■
The symbol
Õ
disappears, reloading
is possible.
■
The symbol
Õ
lights up, reloading is
not possible.
To continue the programme, touch the
A
button. The programme continues
automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Touch the
A
button.
2.
Select another programme.
3.
And touch the
A
button again. The
new programme starts from the
beginning.
Cancel the programme
For programmes at high temperatures:
1.
Touch the
A
button.
2.
To cool down laundry: Select
Rinse
.
3.
And touch the
A
button again.
For programmes at low temperatures:
1.
Touch the
A
button.
2.
Select
Spin
.
3.
And touch the
A
button again.
Programme end
End
lights up on the Touch-Display and
A
and
Õ
displays are off.
Removing laundry/switching
off the appliance
1.
Press the
#
button till the indicator
lamp turns off, release the button.
The appliance is switched off.
2.
Open the door and remove the
laundry.
3.
Turn off the water tap.
Note:
Not required for Aqua-Stop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Wipe the rubber seal dry.