en
Appliance settings
36
Q
Appliance settings
Appliance settings
You can change the following settings
in the control and display panel:
■
The volume of the information signal
(e.g. at the end of the programme),
■
The volume of the operating signals,
■
The brightness of the operating and
display field,
■
Select/deselect the memory function
for drum care.
You will need to activate the setting
mode in order to change these settings.
Activating the setting mode
1.
Switch on the appliance. The
settings for the current programme
are displayed.
2.
Touch the control panel
œ
.
The setting mode is activated and the
displays for the information signals
U
and the preset volume light up.
You can now change the settings:
Changing the signal volume
To do this, touch
N
or
M
on the control
panel until the required adjustment
value for the volume of the
information
signals
appears:
Adjustment values:
Exit setting mode or:
Touch
œ
again. The display for the
operating signals
C
and the preset
volume light up.
Touch
N
or
M
to change the
adjustment value (as above).
Exit setting mode or:
Changing the brightness of
the touch display
Touch
œ
again. The display for the
touch display's brightness
B
and the
preset brightness light up.
Change the adjustment value by
touching
N
or
M
:
Adjustment values:
Exit setting mode or:
Select/deselect the memory
function for drum care
Touch
œ
again. The display for the
memory function for cleaning the drum
Û
lights up.
Touch
N
or
M
to select (on) or deselect
(off) the memory function.
Exiting setting mode
To exit and save the settings:
■
Wait for approx. 15 minutes or
■
Touch
œ
one last time or
■
Switch off the appliance. The
selected settings will take effect the
next time the washing machine is
switched on.
0
off
1
quiet
2
Medium
3
loud
4
very loud
1
Not very bright
2
Normal level of
brightness
3
Bright
4
Very bright
Summary of Contents for WAT2876XES
Page 47: ...6 ...
