en
Troubleshooting
46
Fault
Cause
Troubleshooting
"E:36 / -10"
Unapproved extension in-
stalled on the water drain
hose.
▶
Remove any unapproved exten-
sions from the water hose. Connect-
ing the appliance
"E:36 / -25 / -26"
Drain pump is blocked.
▶
The water pressure is low.
No remedial action possible.
The filter in the water inflow
is blocked.
▶
"Clean the water inflow filter"
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is
kinked or jammed.
▶
Ensure that the water inlet hose is
not kinked or jammed.
"E:35 / -10"
There is water in the base
trough.
▶
Turn off the water tap.
▶
Call the after-sales service.
The appliance is leaking.
▶
Turn off the water tap.
▶
Call the after-sales service.
lights up.
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
Water level is too high.
▶
Start the
Abpumpen
programme.
Laundry is caught in the
door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Start / Nachlegen / Pause
to start the programme.
flashes.
Door is not closed.
1.
Close the door.
2.
Press
Start / Nachlegen / Pause
to start the programme.
All other error codes.
Malfunction
▶
Call the after-sales service.
Malfunctions
Fault
Cause
Troubleshooting
The appliance is not work-
ing.
The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power
supply.
Summary of Contents for WAN282H2
Page 59: ......