en
Faults and what to do about them.
24
Information about the indicator lights
Faults and what to do about them.
Display*
Cause/Remedy
Display*
Cause/Remedy
Close the washing machine door
properly; washing may be
trapped.
Motor fault. Call the after-sales
service.
Drain pump blocked; clean the
drain pump
Drain hose/outlet pipe blocked;
clean drain hose on the siphon
There is water in the base
trough*, the appliance is leaking.
Call the after-sales service.
Turn on the tap fully, supply hose
kinked/jammed: Clean the filter
low.
* Depending on the model
Faults
Cause/Remedy
Water is leaking from the
appliance.
■
Attach the drain hose correctly or replace it.
■
Tighten the screw joint on the supply hose.
The appliance is not filling
with water.
Detergent is not being dis-
pensed.
■
Start
/Pause not selected?
■
Is the tap turned on?
■
Could the filter be clogged? Clean the filter.
■
Is the supply hose kinked or trapped?
The door cannot be
opened.
■
The safety function is activated. Wait for approx. 2 minutes.
■
$
(without final spin) selected?
■
Can be opened by emergency release only?
The programme does not
start.
■
Start
/Pause selected?
■
Is the door closed?
The water is not draining.
■
$
(without final spin) selected?
■
Clean the drain pump.
■
Clean the outlet pipe and/or the drain hose.
Water is not visible in the
drum.
Not a fault – the water is below the visible area.
