Operating the appliance
en
17
1.
Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2.
Slide the measuring aid forwards,
fold it down and click it into place.
3.
Reinsert the drawer.
Note:
Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash or when
the "Finished in" time is selected.
For models without a measuring aid
,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Select the
Start
/Pause button. The
indicator light lights up and the
programme starts.
Adding laundry
After starting the programme, you can
add or remove laundry as required.
To do this, press the Start/
Pause
button.
Note:
Do not leave the washing
machine door open for too long when
adding laundry as water from the
laundry may leak out.
For safety reasons, the washing
machine door remains locked when the
water level or temperature is high, or
while the drum is rotating, and it is not
possible to add laundry.
To continue the programme, press
the
Start
/Pause button. The programme
continues automatically.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Select another programme.
2.
Select
Start
/Pause. The new
programme starts from the
beginning.
Cancel the programme
For programmes at high temperature:
1.
To cool the laundry, select
Rinse
/
Spin.
2.
Select
Start
/Pause.
For programmes at low temperatures:
1.
Select Start/
Pause
.
2.
Select
Rinse/Spin
(deactivate the
Rinse plus/Aqua plus
button) or
select
Drain
.
3.
Select
Start
/Pause.
Programme end during rinse
hold
The
Rinse Stop
and
O
Rinse
indicator
lights light up and the indicator lamp for
the Start/Pause button flashes.
To end the programme, set the
programme selector to "Drain" or select
a spin speed. Then select the
Start
/
Pause button.
