Positioning and connecting
en
29
■
AquaStop
model
Carefully turn the tap on, and check that
the connection points are not leaking.
Note:
The screw connection is under
mains water pressure.
Water outlet
Caution!
Water damage
If the drain hose slips out of the
washbasin or the connection point
during draining due to high water
pressure, any escaping water may
cause water damage.
Secure the drain hose so that it cannot
slip out.
Notes
■
Do not kink the water drain hose or
stretch it lengthways.
■
Height difference between the
installation surface and the drain:
Min. 60 cm, max. 100 cm
You can lay the water outlet hose as
follows:
■
Drainage into a washbasin
:
Warning
Risk of scalding!
When washing at high temperatures,
there is a risk of scalding if you
come into contact with hot detergent
solution (e.g. when draining hot
detergent solution into a wash
basin).
Do not reach into the hot detergent
solution.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is
immersed in the drained water, water
may be sucked back into the
appliance and may damage the
appliance/fabrics.
Make sure that:
– The plug does not block drainage
from the wash basin.
– The end of the drain hose is not
immersed in the drained water.
– The water drains away quickly
enough.
■
Drainage into a siphon
The connection point must be
secured using a hose clamp with a
diameter of 24 – 40 mm (available
from specialist retailers).
