6 000 836 999
2013-05-08
|
Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
Productdescription|��������|9
��������|9
|9
en
The following regulations must be observed when start-
ing up and operating lifting platforms:
R
Rules for lifting platform operation (BGR 500)
R
Basic principles for testing lifting platforms
(BGG 945)
R
Rules for keeping the inspection log (BGG 945-A2)
R
JT/T 155-2004 automobile lift
The lifting platform is not to be used as a crane or as
a support for other lifting mechanisms (e.g. block and
tackle).
The lifting platform is designed such that people
can stand under the loadbearing elements. It is not
equipped to permit walking on the lifting platform or
for conveying people.
Erection of the lifting platform is prohibited in explo-
sion and fire hazard areas, outdoor areas and in damp
atmospheres (e.g. washing shops).
The original operating instructions must be kept in
a conspicuous, constantly accessible location near
the lifting platform. All the above regulations must be
heeded as well as the applicable rules on work safety
and accident prevention.
5.
Product description
�.1
Intendeduse
The type approved lifting platform VLH 2235H is intend-
ed solely for the following applications:
R
Lifting of passenger/motor vehicles by way of four
support arms.
Compliance with the limit values for loadbearing capac-
ity and load distribution must always be ensured.
�.�
Authorizedusers
Only users aged 18 or above who have been instructed
on how to operate the lifting platform and have proven
their ability to do so to the owner are to be entrusted
with unsupervised operation of lifting platforms. The
task of operating the lifting platform must be expressly
assigned to users by the owner. Authorization to oper-
ate lifting platforms must be granted in writing.
Before loading a vehicle onto the lifting platform, users
should study the original operating instructions and
familiarize themselves with the operating procedures in
several trial runs.
�.�
Productversions
The following versions of the VLH 2235H are available:
Name
Ordernumber
Descriptions
Two posts lift
1 697 000 914
380V/50Hz
Two posts lift
1 697 000 924
220V/50Hz
These instructions apply to all versions of the
VLH 2235H.
�.4
Specialaccessories
Information on special accessories (e.g. special sup-
port arms or mounts) can be obtained from your Bosch
franchized dealer.
�.�
Transportationinformation
The VLH 2235H is normally supplied as two packing
units, the dimension information as below:
Package
Dimensions
1 x pallet(Main unit)
3,750 x 560 x 700mm
1 x pallet(Hydraulic unit)
850 x 280 x 330mm
In-housetransportation
The user must provide a fork lift truck for in-house
transport. The center of gravity and lashing points are
marked on the packaging.
X
Fig. 4:
Center of gravity of packaging (example)
