10
en | Installing a Recessed Mount
AutoDome Junior
F.01U.168.034 | 3.0 | 2010.12
Installation Manual
Bosch Security Systems, Inc.
8.
Attach the camera to the mounting plate by inserting the
vertical tab on the plate (item 1, below) into the recessed
slot on the top of the camera dome (Item 3) to the right of
the safety locking screw (item 2).
Note:
Do not loosen the three brass buttons (item 4).
These brass buttons engage the slotted tabs (item 5) on
the mounting plate.
Figure 1.6
Tab/Slot Alignment Detail
1
Vertical Tab (on mounting plate)
2
Locking Screw
3
Recessed Slot (on dome housing)
4
Brass Button (total of three on housing)
5
Slotted Tab (total of three on mounting plate)
